If you’re wondering how to choose the best speed setting for your central heating pump, then you’re not alone. It’s one of the most frequently asked questions about central heating pumps.
Although it appears confusing at first, finding the most efficient speed setting for your pump is actually quite simple – and this article will show you how to do it.
Problems with central heating systems are generally rare, but there are occasions when repairs need to be carried out, which may involve draining the entire system.
If you are not familiar with your heating system, it is recommended that you contact a qualified plumber to undertake any repairs. You should also remember that if any work is required on the boiler or the connection to the mains gas supply, it must be done by a gas safe registered technician.
Heating bills account for over half the money spent on energy in the average UK household. An efficient central heating system will save money annually and is one way to combat rising energy prices.
Upgrading a ‘G’ rated boiler to an ‘A’ rated boiler could save up to £300 per year according to the energy saving trust, while the savings will be even greater if you are fitting central heating into a property for the first time.
Modern central heating systems are very reliable, but there are instances where repair or maintenance may be required. One of the key advantages to central heating systems is that they are energy efficient and economical.
In the UK today the price of energy is at an all time high, and many people are focussing on their energy consumption in an effort to reduce their carbon emissions and save money on heating bills.
There are several problems that you may encounter with a central heating system and it is not always easy to diagnose the cause of the fault.
In some cases it will be necessary to enlist the services of a professional plumber or heating engineer, but many of the problems can be dealt with simply by adjusting the settings, or for the more confident, by embarking on a little bit of DIY.
Central heating is one of the most energy efficient and cost-effective forms of heating available in the UK today. However, over time any central heating system can become blocked with sludge, rust, and debris, which will make it much less efficient.
If the central heating struggles to fully heat the house, or fuel bills become excessive, it may be necessary to flush the heating system and clear any blockages to make sure it is operating effectively. Equally, if you are having a new boiler fitted, it is usually recommended to have the heating system flushed in advance.
Continue reading “Central Heating Flushing”…
Central heating is one of the most energy efficient and effective ways to heat a home, and along with insulation, is one of the best …
The cost of fuel and energy is continuing to rise, so it is important to make our homes as energy-efficient and therefore as cost-effective as …
Gas central heating is the most common type of heating system in use in the UK today. Gas is generally one of the cheaper fuels …
The most common fuel used to power central heating in the UK is mains gas, but with over four million households not connected to the …
The pump is an integral part of a central heating system, circulating the hot water through the network of pipes and to the radiators. An …
If you are planning to install a central heating system, or you are replacing large parts of an existing system, the benefits you can expect …
If you’re wondering how to choose the best speed setting for your central heating pump, then you’re not alone. It’s one of the most frequently …
Problems with central heating systems are generally rare, but there are occasions when repairs need to be carried out, which may involve draining the entire …
Heating bills account for over half the money spent on energy in the average UK household. An efficient central heating system will save money annually …